PU-3500 is a two-component, 85% solids, VOC compliant, polyurethane that was developed as a finish coat for concrete surfaces. It provides outstanding adhesion on a large number of substrates and performs well in a wide range of temperature conditions. It displays outstanding scratch resistance.

PP-ECAST-UV is a 100% solid, two component epoxy casting system. It is used for mass castings with thicknesses greater than 1 inch. It is formulated with hydrogenated epoxy resins, which exhibit superior UV stability. PP-ECAST-UV is designed for casting, potting and embedding applications. The low color and low viscosity allow for bubble free, crystal clear castings ideal for art and hobby applications. It is formulated for a long gel time, with low exothermic heat buildup. This results in superior color stability and prevents heat rings in the final coating. PP-ECAST-UV has a low VOC content, for user safety and reduced environmental impact. This system is approved by the Canadian Food Inspection Agency. It also meets FDA and USDA requirements.

PE-100 is a solvent-less, two component epoxy coating system. It exhibits very good appearance and chemical and physical properties.

PE-OP is a solventless two components epoxy coating system with an orange peel finish. It has an exceptional resistance to abrasion and to a large number of aggressive chemical products. It may be applied on concrete, wood, metal and on any previously applied coating that is well bonded to the substrate.

PE-LT is a solvent-less, two component epoxy coating system, designed for low temperature applications. It exhibits very good appearance and physical properties. This system has the advantage of being fast curing at low temperature.  It exhibits high mechanical strength and good resistance to organic acids.

PE-100FC is a solvent-less, two component epoxy coating system, that was designed for fast cure applications. It exhibits a very good appearance and physical properties. Meets LEED norms.

PE-CREXT is a high-built solvent less two components epoxy novalac coating system designed for severe service coating. It exhibits very good finish and chemical properties. It exhibits very good solvent and chemical resistance. It is suitable for use in direct exposure in manufacturing facilities, warehouses, laboratories, dairies, breweries, chemical plants, paper mills, food processing and pharmaceutical manufacturing.

PE-MF-100 is a 100% solids, two component, epoxy urethane hybrid, coating membrane. It is designed to be used as seamless waterproof membrane to protect concrete from water damage. It also offers excellent chemical resistance and protects against common parking deck chemicals. It is skid resistant and offers excellent durability and abrasion resistance. It exhibits very good mechanical properties, such as high elongation and tear resistance.

PE-100-CASTING is a 100% solid, two component epoxy casting system. It is used for mass castings with thicknesses greater than 1 inch. PE-100-CASTING is designed for casting, potting and embedding applications. The low color and low viscosity allow for bubble free, crystal clear castings ideal for art and hobby applications. It is formulated for a long gel time, with low exothermic heat buildup. PE-100-CASTING has a low VOC content, for user safety and reduced environmental impact. This system is approved by the Canadian Food Inspection Agency. It also meets FDA and USDA requirements.

PE-CR is an epoxy coating system. It exhibits very good solvent and chemical resistance. It is suitable for use in direct exposure in manufacturing facilities, warehouses, laboratories, dairies, breweries, chemical plants, paper mills, food processing and pharmaceutical manufacturing.