Polyurethane Fast Cure Primer

PP-B100

PP-B100 is a two-component, 95 % solids, VOC compliant, polyurea hybrid that was developed as a primer/basecoat for a variety of coating systems. It provides outstanding adhesion on a large number of substrates and performs well in a wide range of temperature conditions.

Advantages

  • Displays moderate cure times with excellent adhesion
  • Easy to mix 2:1 ratio
  • Emits virtually no odors and can be applied indoors
  • Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate
  • Long open times allow for self-leveling capabilities and increased hiding power as well as broadcasts of decorative aggregate
  • Long pot life (35 to 45 min)
  • VOC compliant in all 50 states and Canada

Where to use

  • Aircraft hangar floors
  • Automotive shops
  • Bathrooms and locker roomss
  • Bridge decks and pillars
  • Car washes or wash bays
  • Industrial shop floors
  • Maintenance facilities
  • Offshore platforms
  • Primer/ Basecoat for use on concrete, wood, and block
  • Sidewalks and walkways
  • Wall coatings over sheetrock, wood and concrete
  • Wastewater treatment applications

Technical Data

PACKAGING11.35 L (3 US GAL.)
COLORPART A: UPON REQUEST, PART B: LIGHT YELLOW, MIX: UPON REQUEST
RECOMMENDED THICKNESSPP-B100 - 8 MILS (200 FT²/GAL)
SHELF LIFE12 MONTHS IN ORIGINAL UNOPENED FACTORY SEALED CONTAINERS. KEEP AWAY FROM EXTREME COLD, HEAT, OR MOISTURE. KEEP OUT OF DIRECT SUNLIGHT AND AWAY FROM FIRE HAZARDS.
MIX RATIO, BY VOLUMEA:B = 2:1
MIX RATIO, BY WEIGHTA:B = 100:59
POT LIFE (454 G)35 - 45 MINUTES @ 25°C

Documentations

  • MSDS
    PP-B100-A__PolyureaBaseCoatClear-SDS_ANG
  • MSDS
    PP-B100-B__PolyureaBaseCoatClear-SDS_ANG