Solvent Based Acrylic Sealer – Glossy

PurSeal-S20 20L

PurSeal-S is an acrylic liquid formulated to be applied as a sealer on paving stone and on new or old concrete. As a sealer, it improves water tightness against water, dust, etc. It creates a clear film which is resistant to U.V rays.


  • Sealer: improves penetration of oil, water, dust, etc.
  • Cures, seals and hardens the surface in the same process
  • Creates a continuous clear film resistant to yellowing
  • May be applied on horizontal or vertical surfaces
  • Reduce penetration of chloride ions (salts used to melt ice); Protects the framework
  • Helps resist against freezing/unfreezing cycles and against salt penetration
  • Sealer on paving stone, stamped concrete, etc.
  • May be applied as a sealer on old concrete

Where to use

  • Paving stone
  • Sidewalks
  • Bridges
  • Garages and parking lots
  • Exposed aggregates
  • Walls
  • Concrete
  • Silica bricks and stones

Technical Data

AppearanceTransparent liquid
Recommended Thickness4-6 mils (266-400 ft2)
Pot Life (454 g)40-50 minutes
Shelf Life12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. SACT is a flammable material and must be stored adequately. Keep out of direct sunlight and away from fire hazards.