UV Resistant Polyurethane Top Coat

PU-3500

PU-3500 is a two-component, 85% solids, VOC compliant, polyurethane that was developed as a finish coat for concrete surfaces. It provides outstanding adhesion on a large number of substrates and performs well in a wide range of temperature conditions. It displays outstanding scratch resistance.

Advantages

  • Long pot life
  • Displays moderate cure times with excellent adhesion
  • Long open times allow for self-leveling capabilities and increased hiding power as well as broadcasts of decorative aggregate
  • VOC compliant in all 50 states and Canada
  • Easy to mix 1:1 ratio
  • Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate

Where to use

  • Embedding and encapsulationUV-stable top coat
    Resin jewelry
    Resin castings
    Bar top or table top epoxy
    Molding resin
    Art or crafting resin
    High build coatings
    Mass castings

Technical Data

PACKAGING7.57 L (2 US GAL KIT) OR 37.8 L (10 US GAL KIT)
COLORCLEAR
RECOMMENDED THICKNESSPRIMER (PP-B100) - 8 MILS (200 FT²/GAL) FINISH COAT (PP-S85) - OVER SOLID COLOR : 6 MILS (266 FT²/GAL) - OVER VINYL CHIPS : 10 MILS (160 FT²/GAL)
SHELF LIFE12 MONTHS IN ORIGINAL UNOPENED FACTORY SEALED CONTAINERS. KEEP AWAY FROM EXTREME COLD, HEAT, OR MOISTURE. KEEP OUT OF DIRECT SUNLIGHT AND AWAY FROM FIRE HAZARDS.
MIX RATIO, BY VOLUMEA:B = 2:1
MIX RATIO, BY WEIGHT (GRAMS)A:B = 100:45
POT LIFE (454 G)360 MINUTES (6 HOURS)

Documentations


  • PE-100-CASTING_ENG