UV Resistant 100% Solid Polyaspartic

PP-100

PP-100 is a two component, urethane coating system. It provides outstanding appearance, superior chemical, UV, and solvent resistance. It exhibits excellent physical properties.

Advantages

  • Long pot life (30 min to 40 min)
  • Very fast drying in thin film
  • Superior chemical resistance (very good stain resistance)
  • Superior weather and abrasion resistance
  • Non yellowing and good gloss retention
  • Dense surface resistant to bacteria and humidity
  • May be applied several layers on itself
  • Contains no VOC solvents, allowing for interior application without harmful odors
  • Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate

Where to use

  • Marine protection for fiberglass, steel, concrete or wood
  • UV-stable top coat
  • Aircraft hangar floors
  • Low temperature equipment
  • Maintenance facilities
  • Offshore platforms
  • Industrial shop floors
  • Car washes or wash bays
  • Primary and Secondary Containment
  • Cooling towers
  • Bridges
  • Wastewater treatment applications

Technical Data

PACKAGING11.35 L (3 US GAL. KIT)
COLORPART A: UPON REQUEST. PART B: CLEAR, MIX: UPON REQUEST
RECOMMENDED THICKNESSPRIMER (PE-100) - 8 MILS (200 FT²/GAL)
FINISH COAT (PP-100)OVER SOLID COLOR: 6 MILS (266 FT²/GAL), OVER VINYL CHIPS: 10 MILS (160 FT²/GAL)
SHELF LIFE12 MONTHS IN ORIGINAL UNOPENED FACTORY SEALED CONTAINERS. KEEP AWAY FROM EXTREME COLD, HEAT, OR MOISTURE. KEEP OUT OF DIRECT SUNLIGHT AND AWAY FROM FIRE HAZARDS.
MIX RATIO, BY VOLUMEA:B = 1:1
MIX RATIO, BY WEIGHT (GRAMS)A:B = 100:53
POT LIFE (454 G)40 - 50 MINUTES @ 25°C

Documentations

  • MSDS
    PP-100-A_UV 100% Polyaspartic Clear_ANG
  • MSDS
    PP-100-B_UV 100% Polyaspartic Clear_ANG