UV Resistant 95% Solid Polyaspartic

PP-80

PP-80 is a two-component, 83% solids, V.O.C. compliant, aliphatic polyaspartic polyurea that was developed for UV stable floor topcoats. It provides outstanding appearance, superior chemical, UV, and solvent resistance. It exhibits excellent physical properties.

Advantages

  • Long pot life (90 min to 100 min)
  • Displays fast cure times with excellent adhesion
  • Superior chemical resistance
  • Superior weather and abrasion resistance
  • Non yellowing and good gloss retention
  • Easy to mix 1:1 ratio by volume
  • Emits virtually no odors and can be applied indoors
  • Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate
  • V.O.C. compliant in all 50 states and Canada

Where to use

  • Marine protection for fiberglass, steel, concrete or wood
  • UV-stable top coat
  • Aircraft hangar floors
  • Low temperature equipment
  • Maintenance facilities
  • Offshore platforms
  • Industrial shop floors
  • Car washes or wash bays
  • Secondary Containment
  • Cooling towers
  • Bridges
  • Wastewater treatment applications

Technical Data

PACKAGING7.57 L (2 US GAL KIT) OR 37.8 L (10 US GAL KIT)
COLORUPON REQUEST
YIELD/ RECOMMENDED THICKNESSPRIMER (PP-B100) - 8 MILS (200 FT²/GAL), FINISH COAT (PP-80): OVER SOLID COLOR : 6 MILS (266 FT²/GAL), OVER VINYL CHIPS : 10 MILS (160 FT²/GAL)
SHELF LIFE12 MONTHS IN ORIGINAL UNOPENED FACTORY SEALED CONTAINERS. KEEP AWAY FROM EXTREME COLD, HEAT, OR MOISTURE. KEEP OUT OF DIRECT SUNLIGHT AND AWAY FROM FIRE HAZARDS.
MIX RATIO, BY VOLUMEA:B = 1:1
MIX RATIO, BY WEIGHT (GRAMS)A:B = 100:110
POT LIFE (454 G)90-100 MINUTES @ 25°C

Documentations

  • MSDS
    PP-80-A__80% Polyaspartic Top Coat Clear_ANG
  • MSDS
    PP-80-B__80% Polyaspartic Top Coat Clear_ANG