UV Resistant Epoxy Casting 100% Solid

PE-100-CASTING-UV

PP-100 CASTING UV is a 100% solid, two component epoxy casting system. It is used for mass castings with thicknesses greater than 1 inch. It is formulated with hydrogenated epoxy resins, which exhibit superior UV stability. PP-100 CASTING UV is designed for casting, potting and embedding applications. The low color and low viscosity allow for bubble free, crystal clear castings ideal for art and hobby applications. It is formulated for a long gel time, with low exothermic heat buildup. This results in superior color stability and prevents heat rings in the final coating. PP-100 CASTING UV has a low VOC content, for user safety and reduced environmental impact. This system is approved by the Canadian Food Inspection Agency. It also meets FDA and USDA requirements.

Advantages

  • 100 % solids, low VOC content and low odor
  • Crystal clear and high gloss appearance
  • Magnifies object appearance
  • Self-levelling
  • Dense surface resistant to bacteria and moisture
  • Excellent air release qualities
  • Will not distort with age

Where to use

  • Embedding and encapsulation
  • Resin jewelry
  • Resin castings
  • Bar top or table top epoxy
  • Molding resin
  • Art or crafting resin
  • High build coatings
  • Mass castings

Technical Data

PACKAGING7.57 L (2 US GAL KIT) OR 37.8 L (10 US GAL KIT)
COLORCLEAR
YIELD/ RECOMMENDED THICKNESSPRIMER (PP-B100) - 8 MILS (200 FT2/GAL) FINISH COAT (PP-S85) - OVER SOLID COLOR : 6 MILS (266 FT2/GAL) - OVER VINYL CHIPS : 10 MILS (160 FT2/GAL)
SHELF LIFE12 MONTHS IN ORIGINAL UNOPENED FACTORY SEALED CONTAINERS. KEEP AWAY FROM EXTREME COLD, HEAT, OR MOISTURE. KEEP OUT OF DIRECT SUNLIGHT AND AWAY FROM FIRE HAZARDS.
MIX RATIO, BY VOLUMEA:B = 2:1
MIX RATIO, BY WEIGHT (GRAMS)A:B = 100:45
POT LIFE (454 G)360 MINUTES (6 HOURS)

Documentations