PUR-SEAL 20S Solvent based acrylic sealer – Glossy
PUR-SEAL 20S is an acrylic liquid formulated to be applied as a sealer on paving stone and on new or old concrete. As a sealer, it improves water tightness against water, dust, etc. It creates a clear film which is resistant to U.V rays.
ADVANTAGES
- Sealer: improves penetration of oil, water, dust, etc.
- Cures, seals and hardens the surface in the same process
- Creates a continuous clear film resistant to yellowing
- May be applied on horizontal or vertical surfaces
- Reduce penetration of chloride ions (salts used to melt ice); Protects the framework
- Helps resist against freezing/unfreezing cycles and against salt penetration
- Sealer on paving stone, stamped concrete, etc.
- May be applied as a sealer on old concrete
WHERE TO USE
- Paving stone
- Sidewalks
- Bridges
- Garages and parking lots
- Exposed aggregates
- Walls
- Concrete
- Silica bricks and stones
TECHNICAL DATA
IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage.
| APPEARANCE | Transparent liquid |
| RECOMMENDED THICKNESS | 4-6 mils (266-400 ft²) |
| SHELF LIFE | 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. SACT is a flammable material and must be stored adequately. Keep out of direct sunlight and away from fire hazards. |
| POT LIFE | 40-50 minutes |
Technical Data Sheets (TDS)