PE-CF ULTRA Epoxy crack filler

PE-CF ULTRA Epoxy crack filler

PE-CF ULTRA is a 100% solids, non-shrink, non-sag, moisture insensitive, two-component modified high-modulus smooth epoxy paste adhesive formulated to adhere and cure on damp or dry surfaces.

ADVANTAGES

  • Paste consistency ideal for horizontal, vertical and overhead crack sealing.
  • Very rapid curing for faster pressure injection grouting.
  • Cures and adheres on dry or damp surfaces.
  • Injection may proceed after approximately 30 minutes.
  • Convenient 2 to 1 volume mix ratio.
  • Excellent adhesion to wood, masonry, concrete, steel and most building substrates.
  • Applicable / Curable down to 200°F (-6°C)

WHERE TO USE

  • Used to seal the surface opening of cracks and to secure injection ports on concrete and wood prior to pressure injection grouting.
  • Used on non-structural and structural grouting projects.
  • Used to seal routed crack surfaces on non-moving cracks.

TECHNICAL DATA

IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage.

PACKAGING 3 US GAL (11.35 L)
COLOR PART A: LIGHT GREY
PART B: AMBER
MIX: LIGHT GREY
RECOMMENDED THICKNESS 20 MILS (80 ft²/gal)
SHELF LIFE 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards.
MIX RATIO, BY VOLUME A:B = 2:1
MIX RATIO, BY WEIGHT A:B = 100:55
DENSITY (KG/L) PART A: 1.06
PART B: 1.15
MIX: 1.11
POT LIFE 30-45 minutes @ 77°F (25°C)
VOC 0 g/L

CRACK FILLERS