PE DEEP CASTING Clear casting epoxy
PE DEEP CASTING is a 100% solid, two component epoxy casting system. It is used for mass castings with thicknesses greater than 1 inch. PE DEEP CASTING is designed for casting, potting and embedding applications. The low color and low viscosity allow for bubble free, crystal clear castings ideal for art and hobby applications. It is formulated for a long gel time, with low exothermic heat buildup. PE DEEP CASTING has a low VOC content, for user safety and reduced environmental impact.
ADVANTAGES
- 100 % solids, low VOC content and low odor
- Crystal clear and high gloss appearance
- Magnifies object appearance
- Dense surface resistant to bacteria and moisture
- Excellent air release qualities
- Will not distort with age
WHERE TO USE
- Embedding and encapsulation
- Resin jewelry
- Resin castings
- Bar top or table top epoxy
- Molding resin
- Art or crafting resin
- High build coatings
- Mass castings
TECHNICAL DATA
| PACKAGING | 3 US gal (11.35 L) or 15 US gal (56.7 L) |
| COLOR | Clear |
| MIX RATIO, BY VOLUME | A:B = 2:1 |
| MIX RATIO, BY WEIGHT | A:B = 100:45 |
| POT LIFE | 360 minutes (6 hours) @ 77°F (25°C) |
| TACK-FREE TIME @ 77°F (25°C) | 84 hours |
| IDEAL WORKING TEMPERATURE RANGE | OPTIMAL 61 – 81°F (16 – 27°C) |
| RECOMMENDED FULL CURE | 7 DAYS @ 77°F (25°C) |
| MAXIMUM CASTABLE AMOUNTS @ 77°F (25°C) | 110 oz (3 kg or 3 Liters) |
| VOC (G/L) | < 10 g/L |
| IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. | |
Technical Data Sheets (TDS)